My Packets Got Framed - Wireless Blog

Koen Verbeeck

A blog about my wireless adventures, the many issues I ran into and my journey towards CWNE.

Aruba Service Assurance Sensor Review

I ve been testing the Re-branded Sensor for a while now since HPE acquired Cape Networks and i must say that it still has the same look and feel as I was used to before the acquisition. They even added some nice extra features like Reporting, Telnet & ...

Ekahau - Where did my walls go?

Last, i ran into an issue were my walls had suddenly disappeared from my Ekahau project. What i normally would do when starting a new project is use a template containing all standard wall types as well as my custom made walls. This is just a clean...

Why are my Cisco Access Points not transmitting at maximum allowed EIRP?

When looking into my WLC controlled APs’ cli, I noticed that even with the highest configured TX power (Level 1 in the WLC) and several external antenna options they would never Transmit @ max. EIRP for my Regulatory domain following the simple EIRP fo...

Configuring DHCP Option 43 on a MikroTik Routerboard

Building my own knowledge base, i wanted to share another post, this time configuring a Mikrotik 1100 AH Routerboard as a DHCP server with option 43 (VSI). The goal is that Ruckus access points located in a different subnet than the vSZ, SmartZone or...

Capturing 802.11 Frames Using Ruckus Wireless Access Points and Wireshark

Its finally here, my first blog post 🙂. Special thx to Keith Parsons, Ferney Munoz and Tom Carpenter for inspiring me to start blogging. Lets kick-off with something not to hard that I field tested some time ago, nevertheless very useful for WLAN engin...